Click image to view full size image
| Test Items | Standard | Test Result | |
| Water reduction rate % not less than (≥) | 25 | 39 | |
| Ratio of bleeding rate at normal pressure% Not more than (≤) | 60 | 35 | |
| Air content % not more than (≤) | 6.0 | 3.5 | |
| Setting time difference of concrete (mim) | Initial | -90~+120 | +20 |
| Finial | +40 | ||
| Ratio of compressive strength % not less than (≥) | 1d | 170 | 185 |
| 3d | 160 | 170 | |
| 7d | 150 | 165 | |
| 28d | 140 | 154 | |
| Shrinkage ratio % not less than (≤) | 28d | 110 | 75 |
| Corrosion to rebar | Yes or No | No | |
Ⅰ.Main performance characteristics
1.High water reduction rate, excellent dispersion, up to more than 40% water reduction rate when saturated content.
2.Good early strength and enhancement effect, high early strength growth rate, improve shrinkage performance and
reduce the carbonization rate of concrete.
3.Greatly improve the durability of concrete, can improve initial strength and finial strength of concrete, improve water
repellent and anti-freezing, reduce the shrinkage and the carbonization rate of concrete, alkali - resistant aggregate
reaction, improve durability.
4.Good adaptability, all kinds of Portland cement, ordinary Portland cement, slag Portland cement and all kinds of
admixture have good dispersion.
5.Good slump retention performance, with good extension of the concrete transport time and site detention time,
to ensure the concrete pumping construction performance.
Ⅱ.Recommended parameters and usage
1.The general admixture amount of WJF09 polycarboxylate superplasticizer is 0.3% ~0.6% of the total weight
of cementing materials, and the specific admixture amount should be determined through experiments by test.
2. This product can be added to sand, stone, cement and admixture at the same time or later with mixing water
until the specified time.
3. In order to achieve good water reduction effect, the recommended mixing time is not less than 120s by concrete
mixing machine.
Ⅲ.Attention
1. Do not mix with naphthalene superplasticizer and other compound products;
2. Test must be carried out when mixing with other additives.
Ⅳ.Storage and shelf life
1. Keep in a cool and dry place and away from direct sunlight;
2. The warranty period is 12 months, After the expiration date, it should be retested and used only after it qualified.
http://www.eastchemy.com/